How to Make Your Own Pumpkin 3D Picture like artist Purple Faye’s Original 3D Acrylic Painting

In this blog post I’m going to show you how to make your own pumpkin 3D picture like artist Purple Faye’s (me) original 3D acrylic painting, using the ‘Make Your Own Pumpkin 3D Picture Kit’ by Yorkshire artist Purple Faye.

First, you need to buy the kit here

Your kit contains step-by-step instructions to talk you through the cardboard and modroc stages of making your pumpkin 3D picture. However, as the kits don’t contain paints I don’t go into any detail as to how you might like to paint it. You can enjoy making it up for yourself but just in case you’d like some guidance here’s how I made the original 3D acrylic painting that the kits are based on. I made this one back in October 2012 when I just moved into my pop up shop in Castleford as a way to celebrate moving in and to decorate my shop for Halloween. Every October since then I put it on display in my studio as a nice reminder of this time. That’s why I finally decided this year to make a kit so you can make your own. So every year you can get it back out and remember when you made it, which is something you can’t do with a real pumpkin that will rot away once you’ve carved it.

I started by drawing the pumpkin design directly onto the piece of cardboard, you don’t have to worry about doing this as you already have the design drawn for you by me in the form of the template. All you need to do is cut it out and use that, following my instructions of which bits to cut out and where to put them.

Next I cut out the design. Building up the cardboard layers to make it 3D then sticking them onto the blank canvas.

It is this cardboard stage that makes them really 3D but because it is cardboard it isn’t as heavy as people think it will be when they think it’s solid plaster being used. So you don’t need to worry about it making your wall fall down when you hang your masterpiece on it.

The next stage is applying the modroc (bandages with plaster of Paris in them) over the cardboard layers.

I did this by getting my piece of modroc and cutting it to the rough shape of what I needed, keeping in mind that it shrinks when wet so it’d need to be a bit bigger plus have some overlap to go round the edges too. I cut it when it’s dry as it’s easier to cut when it’s dry rather than wet. Plus once it gets wet that’s it you have to use it, so if you don’t need to use it all then you can’t save any offcuts for later.

I wet the modroc by filling a container (an old Tupperware dish) with cold water (using cold water slows down the setting time so you have longer to use it, warm water speeds it up) and a squirt of PVA/craft glue then dunking each piece of cut out modroc separately to try and reduce the amount of scrunching up in the water.

When removing the modroc from the water I try to wring out as much water as I can without distorting the shape too much. I then place it on top of the cardboard and start to smooth it out so it covers all the area that I need it to. I continue to do this until the whole cardboard shape is completely covered, then I leave it to dry.

When the modroc is setting and still wet it looks a lightish grey colour and gets more white the drier it gets. I try to leave mine overnight at least to make sure it’s fully dry, it dries faster the warmer it is so if you wanted to speed up the process you can use a hairdryer on it.

Once it’s dry I give mine a quick sand with some fine sandpaper, just to get rid of any rough bits, then I start to paint it with acrylic paints. You can use whatever paints you have available though. For this one I used orange, yellow, green, navy blue and black.

I started by painting the whole of the pumpkin orange, once as the base coat to seal the modroc and then another top coat to make sure it was fully covered. Next I painted the stalk green and the eyes, nose and mouth holes black. Once the orange and green had dried I used the yellow to add highlights and finally mixed a navy blue with blue and black to paint the background so it looked like a dark sky but not quite as dark as black which I didn’t think worked as well. Using black for the background made the eyes, nose and mouth look like they were part of the background instead of being the inside of the pumpkin.

So now you know how to make your own pumpkin 3D picture like artist Purple Faye’s (me) original 3D acrylic painting, using the ‘Make Your Own Highland Cow 3D Picture Kit’ by Yorkshire artist Purple Faye.

Enjoy making your kit and if you do get stuck contact me for help.

Find me on social media:

Facebook: facebook.com/purplefaye.co.uk

Instagram: instagram.com/purplefaye_art

Purple Faye x

How to Make Your Own Ballerina 3D Picture like artist Purple Faye’s Original 3D Acrylic Painting

In this blog post I’m going to show you how to make your own Ballerina 3D picture like artist Purple Faye’s (me) original 3D acrylic painting, using the ‘Make Your Own Ballerina 3D Picture Kit’ by Yorkshire artist Purple Faye.

First, you need to buy the kit here

Your kit contains step-by-step instructions to talk you through the cardboard and modroc stages of making your ballerina 3D picture. However, as the kits don’t contain paints I don’t go into any detail as to how you might like to paint it. You can enjoy making it up for yourself but just in case you’d like some guidance here’s how I made the original 3D acrylic painting that the kits are based on.

I started by drawing the ballerina design directly onto the piece of cardboard, you have the design already drawn for you by me in the form of the template, so all you need to do is cut it out and use that. I cut out the cardboard design, created an extra layer for the face and tutu, and used the rounded end of a pencil to make the eyes by pressing into the cardboard.

I pressed down on the hair, legs and arms to squash them, so they didn’t stand out as far in certain places, I also ran the rounded end of the pencil round the sides of the outline, to squash them down a bit too. Finally, I stuck it all down onto the blank canvas with PVA/craft glue and left it to dry.

It is this stage that makes them really 3D but because it’s cardboard it isn’t as heavy as people think it will be when they think it’s solid plaster being used.

The next stage was to apply the modroc (bandages with plaster of Paris in them) over the cardboard layers. I did this by getting my piece of modroc and cutting it to the rough shape of what I needed, keeping in mind that it shrinks when wet so it’d need to be a bit bigger plus have some overlap to go round the edges too. I cut it when it’s dry as it’s easier to cut when it’s dry rather than wet. Plus once it gets wet that’s it you have to use it, so if you don’t need to use it all then you can’t save any offcuts for later.

I wet the modroc by filling a container (an old Tupperware dish) with cold water (using cold water slows down the setting time so you have longer to use it, warm water speeds it up) and a squirt of PVA/craft glue then dunking each piece of cut out modroc separately to try and reduce the amount of scrunching up in the water. When removing the modroc from the water I try to wring out as much water as I can without distorting the shape too much. I then place it on top of the cardboard and start to smooth it out so it covers all the area that I need it to. I continue to do this until the whole cardboard shape is completely covered. To add some texture to the tutu I add some more modroc, on top of the piece that I’ve smoothed over the cardboard, and scrunch it up to create wrinkles then I leave it to dry.

When the modroc is setting and still wet it looks a lightish grey colour and gets more white the drier it gets. I try to leave mine overnight at least to make sure it’s fully dry, it dries faster the warmer it is so if you wanted to speed up the process you can use a hairdryer on it.

Once it’s dry I give mine a quick sand with some fine sandpaper, just to get rid of any rough bits, then I start to paint it with acrylic paints. You can use whatever paints you have available though. For this one I used white, red (to mix pink), dark brown, orange brown, silver, blue and black.

I started by painting the whole of the ballerina white, once as the base coat to seal the modroc and then another top coat to make sure it was fully covered. Next I painted the face, arms and legs pink, painted the hair first with the dark brown then added orange brown highlights once it had dried. I then used white to paint in the shoes, hairband, eyes, necklace and straps for the dress. I used the silver on top of the white on the tutu, shoes and straps then added the face details with black and a bit of pink on the cheeks. Finally, I mixed a light blue to paint the canvas background with.

So now you know how to make your own ballerina 3D picture like artist Purple Faye’s (me) original 3D acrylic painting, using the ‘Make Your Own ballerina 3D Picture Kit’ by Yorkshire artist Purple Faye.

Enjoy making your kit and if you do get stuck contact me for help.

Find me on social media:

Facebook: facebook.com/purplefaye.co.uk

Instagram: instagram.com/purplefaye_art

Purple Faye x

How Yorkshire Artist Purple Faye made the commissioned 3D Acrylic Painting of the American Office Building

In this blog post I’m going to show you how I made this commissioned 3D acrylic painting. The commission was to make a 3D acrylic painting version of a watercolour of the office building featured in the American version of The Office TV show. The significance of this watercolour is that it’s painted by one of the characters, Pam Beesly, in the show.

When I was first contacted about this commission I had to get my head around the fact that I’d firstly be doing a building, which are tricky because of the precision involved with the straight lines and propotions, secondly it’s a copy of someone elses work in a different medium so thirdly I’d have to tranlate the traits of the water colour painting into my own 3D acrylic painting style.

I enjoy a challenge though so was more than happy to take it on. Here’s how I did it:

Working from the picture that the customer sent me I started by drawing out the basic outline onto the cardboard, then cut it out and layered it up so some parts stuck out more than others.

 

Next I laid the dried modroc (bandages with plaster of Paris in, like they use when you break your arm or leg) over the cardboard and cut it to size before dunking it in some water than smoothing it over the cardboard.

 

Once the modroc was dry I sanded it down to get rid of any rough bits then painted a white base coat with acrylic paint. I then drew on top of the base coat with pencil to make it easier to know where to paint the details in.

I started with the trees/hedges as they took up quite a large area felt like an easy way to ease myself into it before tackling the trickier building with all it’s straight lines, that’s also why I did the cars first too.

I decided to paint the black lines in first then use the lighter colours of the building stonework and windows to neated them up and narrow them down. I did this so the pencil lines didn’t get lost by painting over them with the lighter colours first. It meant that I could try and keep them as straight as I could by reducing them to the right size rather than trying to add them afterwards.

Once the building had been completed I moved onto the sky and the foreground carpark.

After a few final details it was finished.

 

IMG_4818

I’m pleased to say that the customer was happy with it, they even said ” So much better than I expected it to be. I love it.” which is so lovely to hear.

If you’d like me to make you your own 3D acrylic painting, as you can see it can be of anything that is significant to you, then get it touch.

purplefaye.co.uk/contact

To see my current commission price list and more of my previous commissions go to:

purplefaye.co.uk/commissions

You can find me on social media if you fancy a chat there

facebook.com/purplefaye.co.uk

Instagram: @purplefaye_art

Would you like to sign up to my newsletter and become a VIP?

Sign up here

 

Till next time,

Take care.

Purple Faye x

purplefaye.co.uk

How artist Purple Faye made the original ‘Charmander’, ‘Bulbasaur’ and ‘Squirtle’ Pokemon inspired 3D acrylic paintings

Continuing on from when I made the original ‘Pikachu’ and ‘Eevee’ Pokemon inspired 3D acrylic paintings, here, I decided to make some more and it made sense to me that the next ones should be the starter Pokemon from the first generation. So here is how I made ‘Charmander’, Bulbasaur’ and ‘Squirtle’

If you’d like to make your own I have kits available for only £5 and £10 here

Charmander here, Bulbasaur here, Squirtle here.

Here’s how I made them:

I started by drawing the design directly onto the cardboard, I then cut the cardboard out and made it into 3D layers. Once these had been stuck onto the blank canvases I covered each one in modroc(bandages with plaster of Paris in them) and painted with acrylic paints when the modroc was dry.

Here’s a more in depth look at each one, which you can use to help you when you’re making your own with one of my kits. Charmander Kit, Bulbasaur Kit, Squirtle Kit.

Charmander Kit, Bulbasaur Kit, Squirtle Kit.

If you need any more help or have any questions get in touch

All of the originals are available for sale, ‘Charmander’ found his forever home at Christmas but ‘Bulbasaur’ and ‘Squirtle’ are still looking for theirs, only £50 each.

Plus I have cards available too for only £2

Shop Now

 

Till next time,

Take care.

Purple Faye x

purplefaye.co.uk

How artist Purple Faye made the original ‘Eevee’ and ‘Pikachu’ Pokemon inspired 3D acrylic paintings

I’ve been a fan of Pokemon for a long time and I’ve been playing Pokemon Go since it came out in 2016.

I’ve been thinking about maing some fan art of it for a while but I’ve only just started making some now. I’ve started with Pikachu and Eeeve because they are the first starters in the switch game Pokemon Let’s Go (plus I’ve always liked those two characters too).

Here’s how I made them both into 3D acrylic paintings starting with the drawing on cardboard, cutting the cardboard out into layers which I then stuck together and covered with modroc (plaster of Paris in bandages) and painted with acrylic paint once the modroc was dry.

This is the ‘Eevee’:

and this is the ‘Pikachu’:

Do you have a favourite Pokemon that you’d like to see me make into a 3D acrylic painting?

I’d love to know what your favourite (or favourites are if you can’t choose just one)

Let me know here.

or leave me a comment below.

Any questions then please ask using the link above too.

 

Till next time,

Take care.

Purple Faye x

purplefaye.co.uk

How to make your own Love Hearts 3D picture like artist Purple Faye.

Earlier this year I took part in Holmfirth Artweek artist demonstrations, 7th-13th July 2019, this time I showed you how to make your very own Love Hearts 3D picture using one of my kits. This is one of my more simple but effective designs which would be ideal for an absolute beginner to make.

 

In the pictures below you can see how I used the template included in the kit to draw out the cardboard layers (the instructions included in the kit tell you which bits you need to cut out), these were then stuck together on the canvas and left to dry.

Next I cut the dry modroc (bandages with plaster of Paris in) to size before I dunked it in a water and PVA/craft glue solution, wrung out the water and spread it out on top of the cardboard love hearts.

This is the stage that the kit gets you too, you then need to leave it to dry. (Mine had from Friday afternoon until Saturday morning in warm temperatures, yours may need longer or you may need to use a hairdryer to help speed things up a bit.)

While you’re waiting for it to dry you can get your paints ready that you’re going to use. I use acrylic paints and all I needed for this was black, white and red (I mixed the pink colour myself using the red and white). I started by painting the large heart in red, I then mixed my pink and used that on the smaller heart once the red was dry. Once the pink was dry I used white to add the highlights in the corners (as shown on the template) and then finished it off with a black background.

etsy.com/uk/shop/purplefayeshop

If you have already bought one of my kits thank you, if you haven’t got one yet but would like to then they are available from my etsy shop here or you can contact me directly here.

If you require any more help/advice then please contact me.

 

Till next time.

Take care.

Purple Faye x

purplefaye.co.uk

 

How artist Purple Faye made the ‘Theo + Dumbo’ 3D acrylic painting

I’ve made a few name signs simialar in style to this in the past but it’s not something that I make much of now. But Theo’s special day was coming up and I wanted to make him something to commemorate it.

I started by drawing out the shapes for the letters, I used the first letter to help me make the rest in the same style and proportions, I then losely positioned them on the canvas to help me gauge how big to make the Dumbo to go alongside.

Next I sketched out a few different sized Dumbos on paper before selecting the one that I felt fitted best with the letters, I then used this paper drawing as a template to cut out the shapes I needed to make it 3D out of cardboard.

Once I was happy with the positioning of the cardboard on the canvas I then stuck it down and left it to dry.

After the glue had dried I could then start cutting out the dry modroc (bandages with plaster of Paris in them) to the shapes that I needed to cover the cardboard and then dunking each one in water (with a bit of glue mixed in to help it stick) wringing it out and smoothing it over the top of the cardboard until it was all thoroughly covered.

This was then left to dry before I could begin to paint it with acrylic paints.

I started by painting the Dumbo a light grey, then painted in the details, I then painted the whole of the background including the letters a light blue colour and added some white clouds to make it look like Dumbo was flying in the sky. I made the letters white so they stood out against the blue and added to the cloud effect, I felt like they didn’t quite stand out enough just white so I then added some silver highlights and a black outline which I think finished it off nicely.

I don’t have many of these sized canvases left but if you would like me to make you a 3D acrylic painting then contact me.

Till next time.

Take care.

Purple Faye x

purplefaye.co.uk

How artist Purple Faye made the commisisoned Spitfire 3D acrylic painting

As it’s coming up to Fathers Day on the 16th on June I thought I’d show you how I made this 3D acrylic painting that was commissioned as a Fathers day gift a few years ago, while I was in my shop in Castleford.

This Spitfire is the actual model, MK11A P8098/PRZ Enfield Spitfire, that his father used to make. He wanted it to be based on the image that he had in his book that had all the different Spitfire models in to use, which is why it looks the way it does. A flat diagram/illustration made into a painting rather than an actual 3D plane.

The customer chose to have it made on a 16x20inch canvas (approx 30x40cm) so I started by selecting a piece of cardboard that would suit being used on a canvas of that size. I was a bit concerned about it being a long thin shape getting lost in the large space of the canvas but after some tests I managed to make it work and began to draw out the design onto the cardboard.

I drew quite a lot of the details in, more than I really needed to at this stage but I wanted to make sure that it would all look ok at that size, not too squashed or out of proportion, before I got further along in the process.

Once I was happy with the outline design I could then start to think about how to make it 3D. I started by cutting out the main outline and then used some of the offcuts to make certain areas more 3D than others by layering it up. The main body has 2 layers then the closest front and back wings and cockpit got another layer to make them stand out further from the main body. So overall there are 3 layers of cardboard making this 3D acrylic painting.

Once the cardboard had been stuck together onto the blank canvas I then put the modroc (bandages with plaster of Paris in them) on top. I cut it to shape first when it was dry then dunked it into a water and PVA/craft glue solution to help it stick onto the cardboard. Once it was fully wet I then wrung the excess water out and placed it on top of the cardboard, smoothing it out so it covered it fully. (It wouldn’t look like metal if it had a fluffy texture like a dog or highland cow). Any little gaps around the sides I filled with small pieces of modroc.

After the modroc had been left to dry completely I gave it a sand down to give myself a smooth surface to paint on, quick wipe down to remove the dust and then the painting with acrylic paints could begin. Starting with a dark green for the base coat then starting to paint the markings in, gradually building up the details, adding the shadows and highlights then finally a light blue background as selected by the customer.

 

When the customer came in to collect the piece they were very happy with it, the smile on their face was so great to see and made me smile too, it’s such a lovely feeling seeing how much someone likes what I’ve made.

If seeing this has given you an idea for a 3D acrylic painting you’d like me to make you, either for yourself or to give as a gift for someone else then get in touch.

Take a look on my etsy shop at my selection of Fathers Day cards available to buy now.

 

Till next time.

Take care.

Purple Faye x

 

Home

 

How to make your own Cat 3D picture like artist Purple Faye.

Thank you for buying one of my kits to make your own Cat 3D Picture.

Here is how I made the original Cat 3D acrylic painting.

When making your kit you don’t have to worry about drawing your own design as I have already done this for you in the form of the template. So all you need to do is use the template and follow the instructions that I included with the kit.

If you’d like some ideas of how to paint your Cat 3D picture then you can see how I used acrylic paint to paint mine below.

etsy.com/uk/shop/purplefayeshop

 

If you require any more help/advice then please contact me.

 

Till next time.

Take care.

Purple Faye x

purplefaye.co.uk

How artist Purple Faye made the ‘Smaller Daffodil’ 3D acrylic painting

Here’s how I made my ‘Smaller Daffodil’ 3D acrylic painting. (I also made the ‘Medium Daffodil’ at the same time as I made this, which you can see the making of here.)

I started with a cardboard box and cut out a piece that was roughly the same size as the blank canvas I was going to use. I chose quite a thick cardboard as I wanted it to be quite chunky all over, even the base layer which just uses one layer of cardboard.

Next I drew the daffodil design freehand onto the cardboard, using some photographs as a reference, and cut it out all along the outline.I seperated the flower head shape from the stem and placed them both onto the blank canvas to get an idea of the positioning. Placing the flower head on top of the top of the stem meant that it was raised and stuck out slightly more, then an extra layer for the circle in the middle made that the focal point that sticks out the most.

After sticking all the cardboard layers together onto the blank canvas and waiting for it to dry I could then cover it with modroc (plaster of Paris impregnated bandages) let that dry then start painting it with acrylic paints.

I decided to make this a traditional yellow daffodil with a green stem and a purple background to compliment the yellow and green. As with the ‘Medium Daffodil’ the dark purple on it’s own didn’t quite provide enough of a pop so I added the lighter purple and was happy with how it all worked together.

The finished piece is available to buy from my etsy shop.

Don’t forget to get 10% off in my etsy shop by getting the discount code here.

 

etsy.com/uk/shop/purplefayeshop

Contact me here.

Till next time,

take care.

Purple Faye x

purplefaye.co.uk