How to Make Your Own Pumpkin 3D Picture like artist Purple Faye’s Original 3D Acrylic Painting

In this blog post I’m going to show you how to make your own pumpkin 3D picture like artist Purple Faye’s (me) original 3D acrylic painting, using the ‘Make Your Own Pumpkin 3D Picture Kit’ by Yorkshire artist Purple Faye.

First, you need to buy the kit here

Your kit contains step-by-step instructions to talk you through the cardboard and modroc stages of making your pumpkin 3D picture. However, as the kits don’t contain paints I don’t go into any detail as to how you might like to paint it. You can enjoy making it up for yourself but just in case you’d like some guidance here’s how I made the original 3D acrylic painting that the kits are based on. I made this one back in October 2012 when I just moved into my pop up shop in Castleford as a way to celebrate moving in and to decorate my shop for Halloween. Every October since then I put it on display in my studio as a nice reminder of this time. That’s why I finally decided this year to make a kit so you can make your own. So every year you can get it back out and remember when you made it, which is something you can’t do with a real pumpkin that will rot away once you’ve carved it.

I started by drawing the pumpkin design directly onto the piece of cardboard, you don’t have to worry about doing this as you already have the design drawn for you by me in the form of the template. All you need to do is cut it out and use that, following my instructions of which bits to cut out and where to put them.

Next I cut out the design. Building up the cardboard layers to make it 3D then sticking them onto the blank canvas.

It is this cardboard stage that makes them really 3D but because it is cardboard it isn’t as heavy as people think it will be when they think it’s solid plaster being used. So you don’t need to worry about it making your wall fall down when you hang your masterpiece on it.

The next stage is applying the modroc (bandages with plaster of Paris in them) over the cardboard layers.

I did this by getting my piece of modroc and cutting it to the rough shape of what I needed, keeping in mind that it shrinks when wet so it’d need to be a bit bigger plus have some overlap to go round the edges too. I cut it when it’s dry as it’s easier to cut when it’s dry rather than wet. Plus once it gets wet that’s it you have to use it, so if you don’t need to use it all then you can’t save any offcuts for later.

I wet the modroc by filling a container (an old Tupperware dish) with cold water (using cold water slows down the setting time so you have longer to use it, warm water speeds it up) and a squirt of PVA/craft glue then dunking each piece of cut out modroc separately to try and reduce the amount of scrunching up in the water.

When removing the modroc from the water I try to wring out as much water as I can without distorting the shape too much. I then place it on top of the cardboard and start to smooth it out so it covers all the area that I need it to. I continue to do this until the whole cardboard shape is completely covered, then I leave it to dry.

When the modroc is setting and still wet it looks a lightish grey colour and gets more white the drier it gets. I try to leave mine overnight at least to make sure it’s fully dry, it dries faster the warmer it is so if you wanted to speed up the process you can use a hairdryer on it.

Once it’s dry I give mine a quick sand with some fine sandpaper, just to get rid of any rough bits, then I start to paint it with acrylic paints. You can use whatever paints you have available though. For this one I used orange, yellow, green, navy blue and black.

I started by painting the whole of the pumpkin orange, once as the base coat to seal the modroc and then another top coat to make sure it was fully covered. Next I painted the stalk green and the eyes, nose and mouth holes black. Once the orange and green had dried I used the yellow to add highlights and finally mixed a navy blue with blue and black to paint the background so it looked like a dark sky but not quite as dark as black which I didn’t think worked as well. Using black for the background made the eyes, nose and mouth look like they were part of the background instead of being the inside of the pumpkin.

So now you know how to make your own pumpkin 3D picture like artist Purple Faye’s (me) original 3D acrylic painting, using the ‘Make Your Own Highland Cow 3D Picture Kit’ by Yorkshire artist Purple Faye.

Enjoy making your kit and if you do get stuck contact me for help.

Find me on social media:

Facebook: facebook.com/purplefaye.co.uk

Instagram: instagram.com/purplefaye_art

Purple Faye x

How to Make Your Own Ballerina 3D Picture like artist Purple Faye’s Original 3D Acrylic Painting

In this blog post I’m going to show you how to make your own Ballerina 3D picture like artist Purple Faye’s (me) original 3D acrylic painting, using the ‘Make Your Own Ballerina 3D Picture Kit’ by Yorkshire artist Purple Faye.

First, you need to buy the kit here

Your kit contains step-by-step instructions to talk you through the cardboard and modroc stages of making your ballerina 3D picture. However, as the kits don’t contain paints I don’t go into any detail as to how you might like to paint it. You can enjoy making it up for yourself but just in case you’d like some guidance here’s how I made the original 3D acrylic painting that the kits are based on.

I started by drawing the ballerina design directly onto the piece of cardboard, you have the design already drawn for you by me in the form of the template, so all you need to do is cut it out and use that. I cut out the cardboard design, created an extra layer for the face and tutu, and used the rounded end of a pencil to make the eyes by pressing into the cardboard.

I pressed down on the hair, legs and arms to squash them, so they didn’t stand out as far in certain places, I also ran the rounded end of the pencil round the sides of the outline, to squash them down a bit too. Finally, I stuck it all down onto the blank canvas with PVA/craft glue and left it to dry.

It is this stage that makes them really 3D but because it’s cardboard it isn’t as heavy as people think it will be when they think it’s solid plaster being used.

The next stage was to apply the modroc (bandages with plaster of Paris in them) over the cardboard layers. I did this by getting my piece of modroc and cutting it to the rough shape of what I needed, keeping in mind that it shrinks when wet so it’d need to be a bit bigger plus have some overlap to go round the edges too. I cut it when it’s dry as it’s easier to cut when it’s dry rather than wet. Plus once it gets wet that’s it you have to use it, so if you don’t need to use it all then you can’t save any offcuts for later.

I wet the modroc by filling a container (an old Tupperware dish) with cold water (using cold water slows down the setting time so you have longer to use it, warm water speeds it up) and a squirt of PVA/craft glue then dunking each piece of cut out modroc separately to try and reduce the amount of scrunching up in the water. When removing the modroc from the water I try to wring out as much water as I can without distorting the shape too much. I then place it on top of the cardboard and start to smooth it out so it covers all the area that I need it to. I continue to do this until the whole cardboard shape is completely covered. To add some texture to the tutu I add some more modroc, on top of the piece that I’ve smoothed over the cardboard, and scrunch it up to create wrinkles then I leave it to dry.

When the modroc is setting and still wet it looks a lightish grey colour and gets more white the drier it gets. I try to leave mine overnight at least to make sure it’s fully dry, it dries faster the warmer it is so if you wanted to speed up the process you can use a hairdryer on it.

Once it’s dry I give mine a quick sand with some fine sandpaper, just to get rid of any rough bits, then I start to paint it with acrylic paints. You can use whatever paints you have available though. For this one I used white, red (to mix pink), dark brown, orange brown, silver, blue and black.

I started by painting the whole of the ballerina white, once as the base coat to seal the modroc and then another top coat to make sure it was fully covered. Next I painted the face, arms and legs pink, painted the hair first with the dark brown then added orange brown highlights once it had dried. I then used white to paint in the shoes, hairband, eyes, necklace and straps for the dress. I used the silver on top of the white on the tutu, shoes and straps then added the face details with black and a bit of pink on the cheeks. Finally, I mixed a light blue to paint the canvas background with.

So now you know how to make your own ballerina 3D picture like artist Purple Faye’s (me) original 3D acrylic painting, using the ‘Make Your Own ballerina 3D Picture Kit’ by Yorkshire artist Purple Faye.

Enjoy making your kit and if you do get stuck contact me for help.

Find me on social media:

Facebook: facebook.com/purplefaye.co.uk

Instagram: instagram.com/purplefaye_art

Purple Faye x

How to Make Your Own Stegosaurus Dinosaur 3D Picture like artist Purple Faye’s Original 3D Acrylic Painting

In this blog post I’m going to show you how to make your own stegosaurus dinosaur 3D picture like artist Purple Faye’s (me) original 3D acrylic painting, using the ‘Make Your Own Stegosaurus 3D Picture Kit’ by Yorkshire artist Purple Faye.

First, you need to buy the kit here

Your kit contains step-by-step instructions to talk you through the cardboard and modroc stages of making your stegosaurus dinosaur 3D picture. However, as the kits don’t contain paints I don’t go into any detail as to how you might like to paint it. You can enjoy making it up for yourself but just in case you’d like some guidance here’s how I made the original 3D acrylic painting that the kits are based on.

I started by drawing the stegosaurus dinosaur design directly onto the piece of cardboard, you have the design already drawn for you by me in the form of the template, so all you need to do is cut it out and use that. In the step-by-step instructions I have simplified things slightly but if you want to follow how I made this one I started by cutting out the whole shape from the cardboard and then cut out an eye shape piece.

I pressed down on the legs and tail to squash them, so they didn’t stand out as far as the rest, I also did around the underside of the belly so it looked more rounded. Finally, I squashed every other backplate, so that some stood out more than the others and then stuck it all down onto the blank canvas with PVA/craft glue and left them to dry.

It is this stage that makes them really 3D but because it’s cardboard it isn’t as heavy as people think it will be when they think it’s solid plaster being used.

The next stage was to apply the modroc (bandages with plaster of Paris in them) over the cardboard layers. I did this by getting my piece of modroc and cutting it to the rough shape of what I needed, keeping in mind that it shrinks when wet so it’d need to be a bit bigger plus have some overlap to go round the edges too. I cut it when it’s dry as it’s easier to cut when it’s dry rather than wet. Plus once it gets wet that’s it you have to use it, so if you don’t need to use it all then you can’t save any offcuts for later.

I wet the modroc by filling a container (an old Tupperware dish) with cold water (using cold water slows down the setting time so you have longer to use it, warm water speeds it up) and a squirt of PVA/craft glue then dunking each piece of cut out modroc separately to try and reduce the amount of scrunching up in the water. When removing the modroc from the water I try to wring out as much water as I can without distorting the shape too much. I then place it on top of the cardboard and start to smooth it out so it covers all the area that I need it to. I continue to do this until the whole cardboard shape is completely covered. Then I leave it to dry

When the modroc is setting and still wet it looks a lightish grey colour and gets more white the drier it gets. I try to leave mine overnight at least to make sure it’s fully dry, it dries faster the warmer it is so if you wanted to speed up the process you can use a hairdryer on it.

Once it’s dry I give mine a quick sand with some fine sandpaper, just to get rid of any rough bits, then I start to paint it with acrylic paints. You can use whatever paints you have available though. For this one I only used white, green, yellow, blue and black.

I started by painting the whole of the stegosaurus dinosaur white, once as the base coat to seal the modroc and then another top coat to make sure it was fully covered. Next I painted the body green, painted the eye black and added yellow spots. Finally, I mixed a light blue to paint the canvas background with.

So now you know how to make your own stegosaurus dinosaur 3D picture like artist Purple Faye’s (me) original 3D acrylic painting, using the ‘Make Your Own Stegosaurus 3D Picture Kit’ by Yorkshire artist Purple Faye.

Enjoy making your kit and if you do get stuck contact me for help.

Find me on social media:

Facebook: facebook.com/purplefaye.co.uk

Instagram: instagram.com/purplefaye_art

Purple Faye x

How to Make Your Own Unicorn 3D Picture like artist Purple Faye’s Original 3D Acrylic Painting (rectangle version)

In this blog post I’m going to show you how to make your own unicorn 3D picture like artist Purple Faye’s (me) original 3D acrylic painting, the rectangle version, using the ‘Make Your Own Unicorn 3D Picture Kit’ by Yorkshire artist Purple Faye

First, you need to buy the kit here

Your kit contains step-by-step instructions to talk you through the cardboard and modroc stages of making your Unicorn 3D picture. However, as the kits don’t contain paints I don’t go into any detail as to how you might like to paint it. You can enjoy making it up for yourself but just in case you’d like some guidance here’s how I made the original 3D acrylic painting that the kits are based on.

Using the template I created I started by cutting it out and drawing round it onto the cardboard. I then cut the head/mane off of the template and used this to cut out another cardboard shape. To finish the cardboard stage I cut out the eye and placed all the cardboard cut out shapes onto the blank canvas, stuck them down with PVA/craft glue and left them to dry. It is this stage that makes them really 3D but because it’s cardboard it isn’t as heavy as people think it will be when they think it’s solid plaster being used.

The next stage was to apply the modroc (bandages with plaster of Paris in them) over the cardboard layers. I did this by getting my piece of modroc and cutting it to the rough shape of what I needed, keeping in mind that it shrinks when wet so it’d need to be a bit bigger plus have some overlap to go round the edges too. I cut it when it’s dry as it’s easier to cut when it’s dry rather than wet. Plus once it gets wet that’s it you have to use it, so if you don’t need to use it all then you can’t save any offcuts for later.

I wet the modroc by filling a container (an old Tupperware dish) with cold water (using cold water slows down the setting time so you have longer to use it, warm water speeds it up) and a squirt of PVA/craft glue then dunking each piece of cut out modroc separately to try and reduce the amount of scrunching up in the water. When removing the modroc from the water I try to wring out as much water as I can without distorting the shape too much. I then place it on top of the cardboard and start to smooth it out so it covers all the area that I need it to.

Once it’s all covered, including the sides where it meets the canvas, I then use extra bits on top of the hair/mane and tail to give it more texture. I did this by scrunching/ruffling it up and using my thumbnail, once it started to set, to gently score some lines into it too. You could also try cutting strips, wetting them and rolling them into sausages then placing them on top. To give a kind of dreadlocks appearance.

When the modroc is setting and still wet it looks a lightish grey colour and gets more white the drier it gets. I try to leave mine overnight at least to make sure it’s fully dry, it dries faster the warmer it is so if you wanted to speed up the process you can use a hairdryer on it.

Once it’s dry I give mine a quick sand with some fine sandpaper, just to get rid of any rough bits, then I start to paint it with acrylic paints. You can use whatever paints you have available though. For this one I only used white, shiny purple, gold, blue and black.

I started by painting the whole of the unicorn white, once as the base coat to seal the modroc and then another top coat to make sure it was fully covered. Next I painted the horn gold and the hair/mane and tail in the shiny purple, I mixed a light grey with the black and white to add some shading details to the legs, head and horn. I used the black to add the details on the face (eyes, nose and mouth) then I finished it off by mixing a light blue and painting the canvas background with it.

So now you know how to make your own unicorn 3D picture like artist Purple Faye’s (me) original 3D acrylic painting, the rectangle version, using the ‘Make Your Own Unicorn 3D Picture Kit’ by Yorkshire artist Purple Faye

Enjoy making your kit and if you do get stuck contact me for help.

Find me on social media:

Facebook: facebook.com/purplefaye.co.uk

Instagram: instagram.com/purplefaye_art

Purple Faye x

How to make your own Love Hearts 3D picture like artist Purple Faye.

Earlier this year I took part in Holmfirth Artweek artist demonstrations, 7th-13th July 2019, this time I showed you how to make your very own Love Hearts 3D picture using one of my kits. This is one of my more simple but effective designs which would be ideal for an absolute beginner to make.

 

In the pictures below you can see how I used the template included in the kit to draw out the cardboard layers (the instructions included in the kit tell you which bits you need to cut out), these were then stuck together on the canvas and left to dry.

Next I cut the dry modroc (bandages with plaster of Paris in) to size before I dunked it in a water and PVA/craft glue solution, wrung out the water and spread it out on top of the cardboard love hearts.

This is the stage that the kit gets you too, you then need to leave it to dry. (Mine had from Friday afternoon until Saturday morning in warm temperatures, yours may need longer or you may need to use a hairdryer to help speed things up a bit.)

While you’re waiting for it to dry you can get your paints ready that you’re going to use. I use acrylic paints and all I needed for this was black, white and red (I mixed the pink colour myself using the red and white). I started by painting the large heart in red, I then mixed my pink and used that on the smaller heart once the red was dry. Once the pink was dry I used white to add the highlights in the corners (as shown on the template) and then finished it off with a black background.

etsy.com/uk/shop/purplefayeshop

If you have already bought one of my kits thank you, if you haven’t got one yet but would like to then they are available from my etsy shop here or you can contact me directly here.

If you require any more help/advice then please contact me.

 

Till next time.

Take care.

Purple Faye x

purplefaye.co.uk

 

How to make your own Cat 3D picture like artist Purple Faye.

Thank you for buying one of my kits to make your own Cat 3D Picture.

Here is how I made the original Cat 3D acrylic painting.

When making your kit you don’t have to worry about drawing your own design as I have already done this for you in the form of the template. So all you need to do is use the template and follow the instructions that I included with the kit.

If you’d like some ideas of how to paint your Cat 3D picture then you can see how I used acrylic paint to paint mine below.

etsy.com/uk/shop/purplefayeshop

 

If you require any more help/advice then please contact me.

 

Till next time.

Take care.

Purple Faye x

purplefaye.co.uk

Kits: “Make Your Own” 3D Acrylic Painting

Transform ordinary cardboard and modroc into beautiful 3D Acrylic Paintings

img_2760

Each kit includes modroc, cardboard, blank canvas and instructions

How to order: email info@purplefaye.co.uk  which size + how many

 

These are the kits that I’ve been working on, let me know what you think.

info@purplefaye.co.uk

Take Care

Purple Faye x

purplefaye.co.uk

 

Save