How artist Purple Faye made the ‘Baby George’ 3D acrylic painting

Last year I had the pleasure of making a 3D acrylic painting of 3 month old baby George.

George’s father, Alex, contacted me to make it for his wife, Mellissa, for her 30th birthday. Because Mellissa is blind Alex wanted me to make him one of my 3D acrylic paintings because it would be tactile for her to touch and experience rather than a flat photograph.

He sent me a selection of photographs before deciding, after some discussions with me on which would make a good 3D acrylic painting, on the one that he’d like me to work from.

The one he chose actually ended up being a digital photo taken of a physical photo in a frame, which could have been problematic in terms of reflections and colour distortions but thankfully it wasn’t too bad.

So here is how I made it starting by drawing it directly onto the cardboard so I could cut it out and make it 3D by layering the cardboard up. Once the cardboard layers were stuck on the blank canvas I could then apply the modroc (bandages with plaster of Paris in) and leave it to dry. I then painted it with acrylic paints.

If you would like me to make you a 3D acrylic painting the same size as ‘Baby George’ (12x16inches approx 305x406mm) for only £100 get in touch as this offer is available for a limited time only.

Any questions please ask.

You can be a Purple Faye VIP by joining up here

Till next time.

Take care.

Purple Faye x

PurpleFaye.co.uk

How artist Purple Faye made the ‘Robin’ 3D acrylic painting

In October I showed how I made the Halloween inspired 3D acrylic painting ‘Raven’. While I was making that one I also made this companion piece which was inspired by Christmas, ‘Robin’. Both the birds use the same blue background on the same size canvas, 12×12 inches square, so they sit side by side nicely.

You can see how I made the ‘Raven’ in the blog post I wrote about it here.

Here’s how I made the Robin:

I started by drawing out the design onto the piece of cardboard that I had already cut to the size of the canvas I was going to use, 12×12 inches square. I then cut it out and used more cardboard to create the layers. After sticking all the cardboard pieces together and sticking it onto the blank canvas I then put the modroc (plaster of Paris bandages) on top, scoring lines in to create texture where necessary. Once the modroc was dry I then painted it with acrylic paints. Starting with a mid grey for the base coat and then adding in the shading and details.

If you have any questions or comments please leave them below. If you would like to commission your own 3D acrylic painting to be made for you then get in touch at here.

You can try the technique for yourself using one of my kits available to buy from my online shop.

etsy.com/uk/shop/PurpleFayeShop

 

Have a lovely Christmas and all the best for the New Year!

 

Till next time.

Take care.

Purple Faye x

purplefaye.co.uk