I wrote a blog post earlier this year about working on my “Make Your Own” Kits, if you haven’t read it yet you can do so here.
I’ve been working on the instructions to go in them, this is what I’ve got so far, if you have any suggestions of things to add/change etc then please let me know.
Purple Faye’s 3D Acrylic Painting
- Tactile – Sculptural – Unique –
Suitable for: Beginners of all ages
(Children should be supervised)
Approx time to make: 3hr
(Not including drying time)
What you will need:
- Blank canvas (included)
1 sheet for the main image and 1 for the layers (included)
- Modroc (included)
- Pencil (not included)
- Scissors ((not included)
- PVA/Craft Glue (not included)
- Water (not included)
- Sand Paper (optional, not included)
- Paint Brushes (not included)
- Paints of your choice (not included)
How to Make:
Draw out your design onto the cardboard.
(Think about how big to make it in relation to the canvas so it’s not too big and doesn’t fit on or too small that you can hardly see it and it’s fiddly to cut out (unless you want them to be like that)
Cut all along the outside edge of your design.
Decide which bits of your image are going to be made more 3D and cut these sections out of the main image.
Use the cut out bits as a template to make more of the same shape to layered up on top of each other.
(For example if you were making a 3D painting of a dog you could make the head more 3D than the rest by cutting the head away from the body, drawing round the cut out head shape onto another bit of cardboard then cutting that out so you then have 2 head shaped bits of cardboard to use.
This can be repeated as many times as you want so you get the desired thickness. )
NOTE: You may need to get more cardboard if you choose to do more layers than the provided cardboard will allow. The modroc included may not cover it all if the layers go too high so please keep this in mind.
Stick your cut out cardboard pieces together then stick it all onto the blank canvas.
NOTE: You may want to try positioning it on the canvas before you put the glue on so you’re happy with where it’s going to go.
Once the glue is dry lay the dry modroc over the top of the cardboard image to make sure it will fit.
Cut any overlapping modroc down to size, but keep in mind that the modroc will shrink slightly once it’s been put in water.
Dunk the modroc in the water for a few seconds, wring out some of he water then place the wet modroc back over the cardboard.
Rub the modroc to spread it smoothly over the cardboard.
If you have any off cuts use these to fill any gaps round the sides.
Leave the modroc to dry completely.
(It should change colour from greyish to white as it dries)
When it doesn’t feel damp to the touch it’s ready to be painted.
NOTE: You may want to gently sand down the dry modroc to get the finish that you require
Choose what paints you want to use, I like to use acrylics, and paint your masterpiece
NOTE: You may want to varnish it once the paint has had enough time to dry but it isn’t necessary to do this.
I’d love to see what you’ve made
Email me a picture to firstname.lastname@example.org
Show me on social media:
Twitter/Instagram/Pinterest – purplefayeuk
What do you think? Anything I’ve missed or could do better?
I really appreciate your feedback so let me know 🙂
Till next time,
Purple Faye x